A Serial Number is used to identify your machine and is located on the Serial Number Label on your machine. An Order Number is used to check and maintain your order history and is located on the upper left portion of your packing slip.
What oil does a DR Trimmer take?
NOTE: Use only SAE 30 high detergent oil. Other types of oil could cause problems operating your machine.
What size string does a DR trimmer take?
The pre-cut 25″ cords are the perfect length for use with all DR Trimmers purchased after the spring of 2013.
Why does my lawn mower not turn off?
The most likely culprit is that the ignition switch is failing to ground properly. This is most likely due to poor connection. Clean the wires and connections, then try again, If it still doesn’t stop, you’ll need to replace the ignition itself.
How much oil do I put in my DR trimmer?
Optional DuraBlades for 3/8″ Thick Brush
| Engine | |
|---|---|
| Make | DR Power |
| Number Of Cylinders | 1 |
| Oil Capacity | 20oz |
| Oil Type | 30W HD |
What is HD 30 motor oil?
HD 30 Motor Oil – RAVENOL Super HD 30 RAVENOL Super HD 30 is a high quality conventional blend mineral base motor oil. It is a single grade SAE 30 engine oil formulation designed to minimize friction and wear for year round lubrication in all operating conditions.
How do I get help with my Dr® Trimmer mower?
For assistance please call 1-800-687-6575 If you have any questions or are unsure of your model, please contact one of our experienced Technical Support Specialists via phone or email. Please Note: Parts Lists and Schematics are located in the back of the Owner’s Manual. A guide to solving common problems with your DR ® Trimmer Mower.
Where can I find parts lists and schematics for my Dr® Trimmer?
Please Note: Parts Lists and Schematics are located in the back of the Owner’s Manual. A guide to solving common problems with your DR ® Trimmer Mower. Most problems are easy to fix.
What should I do if my trimmer head does not spin?
Check against the figure “Trimmer Head Belt – All Models” in your Owner’s Manual. The belt may be worn or frayed; replace it. See your Owner’s Manual for instructions on replacing the belt. If the trimmer head still will not spin, follow the procedure for “Adjusting the Belt Tension through the Trimmer Control Cable” in your Owner’s Manual.
What should I do if my Dr field and brush mower makes noise?
The DR FIELD and BRUSH MOWER is designed to mow grass and brush. Do not use it for any other purpose. If the machine makes an unusual noise or vibration or if there are obstructions underneath the machine, shut off the DR FIELD and BRUSH MOWER engine. Wait five minutes for the engine to cool. Disconnect the spark plug wire(s) and then
