Choose A Location
- The best place for your standard antenna is the center of your roof, where you will have the greatest ground plane coverage.
- When you install a CB antenna on the fender, bumper, or anywhere else around the edge of your vehicle, you will have a weaker signal going away from the vehicle.
How high does a CB radio antenna need to be?
Generally, the higher the antenna is above ground, the better it will perform. Good practice is to install your vertical antenna about 5 to 10 feet above the roof line and away from power lines and obstructions. Remember that the FCC limits your antenna height to 60 feet.
How much does it cost to install a CB radio?
Alternately, many auto shops or national chains will handle the installation. Expect to pay $50- $100 depending on geographic location and the size and type of antenna. While even a basic CB radio will include a microphone, one may want to upgrade to a power microphone or noise-canceling mic.
Do you have to ground a CB antenna?
Ground Your Antenna Mount If you’re using a standard CB antenna (i.e., anything except a no ground plane, or NGP, kit), you’ll need to make sure your antenna mount is solidly grounded to the vehicle’s chassis. To ensure a good ground, check that your mount has a direct metal-on-metal connection to your vehicle’s frame.
Do you have to ground CB antenna?
Is it legal to have a CB radio in your car?
The Communications Act of 1934 (the “Act”) prohibits anyone from transmitting “energy or communications or signals by radio within the United States except under and in accordance with the Act and with a license.” CB operators are not required to have a license because the FCC’s rules authorize their operation, but …
Is a CB radio worth having?
Even with the rise of cell phones, a good CB radio is a quality investment for times you’re out of cell phone service. They provide a reliable mode of communication for truck drivers and groups road-tripping or off-roading through rural areas.
Should a CB antenna be grounded?
How do you hook up a CB radio?
The recommended way to hook up a CB radio is to wire both the radio’s positive and negative wires directly to the corresponding negative and positive terminals of your car battery. To do this often will require more wire than is provided with your CB radio.
How do you install a CB radio?
Steps Select a CB radio. Select a suitable location. Install the mounting.On the frame below the seat there’s a stock hole. Install your own bolt and nut combo to fit the hole and stock CB radio mount. Install the wiring. Fix the power wires. Install the mike mount: Mount the mike. Drill through the lower dash to mount. Install antenna cable.
What’s the best CB radio and antenna?
WILSON 305-38 300-Watt Little Wil Magnet Mount Antenna. This is one of the most popular magnet mount antenna you can get for your CB.
Do I need an antenna for my CB radio?
CB Radio – Most new CB radios come with a microphone, mounting bracket and power cord, so you won’t need to buy those separately. CB Antenna – Without an antenna, your radio is useless! Don’t forget this key component. CB Antenna Mount – You’ll need a mount of some sort to attach the antenna to your vehicle.
