SikaGrout®-212 is an excellent grout for pumping, even at high flow. For pump recommendations, contact Technical Service. After grout has achieved final set, remove forms, trim or shape exposed grout shoulders to designed profile.
How do you mix Sika 212?
Pour the water in the recommended proportion into a suitable mixing container. While stirring slowly, add the powder to the water. Mix with low speed (< 500 rpm) hand drill mixer to avoid entraining too much air. Mix thoroughly at least for 3 minutes until homogenous with no lumps.
How long does Sika grout take to dry?
Sika® FastFix All Weather will start to set in 6-12 hours above 15 °C in dry conditions. Allow up to 5 days for full set in temperatures between 4 °C and 15 °C. Contact with rain or moisture can temporarily soften the product if wetted before full set.
How much is Sika grout?
90824 SikaGrout 212 General Purpose Cementitious Grout, 50lb [SIKA-90824] : Concrete Mix, Mortar & Grout – $8.99 EMI Supply, Inc.
What is grout cement?
Grout is generally a mixture of water, cement, and sand and is employed in pressure grouting, embedding rebar in masonry walls, connecting sections of pre-cast concrete, filling voids, and sealing joints such as those between tiles.
Is Sika jointing compound any good?
5.0 out of 5 stars It’s A Doddle. Simple to use and it does exactly what it says and worked great on these large gaps. I chased out the old mortar between the sandstone slabs, removed all the loose material, wet the joint areas and brushed it in then tamped in down to make sure it was solid.
Can you jet wash Sika jointing compound?
I’ve used Sika ‘Wide Jointing Compound’ on our flagged patio and found it quite good, but its too coarse for the fine joints of block paving. Some of it came out with the jet wash, especially when using the ‘high pressure lance’, but most of it stayed put when using a Karcher T-350 patio cleaning brush.
