If your speaker is dead in the water, your two main options are to replace or recone it. Reconing is a process in which all the moving parts, including the voice coil, surround, and cone, are replaced.
Are Reconed speakers good?
Generally speaking, new speakers work better and last longer than old ones, and you’ll never get a reconed speaker to sound exactly like the original did. There are cases when reconing speakers makes perfect sense. From a pure cost standpoint, reconing is sometimes less expensive than replacing.
How much does reconing a speaker cost?
| Size / Model | Price |
|---|---|
| 8″ Guitar Speaker Recone | $65 |
| 10″ Guitar Speaker Recone | $65 |
| 12″ Guitar Speaker Recone | $65 |
| 15″ Guitar Speaker Recone | $75 |
What is reconing?
Reconing is the removal and replacement of all the moving parts in the speaker frame. This includes the voice coil, spider, cone, surround, gaskets, dustcap and leads.
How do you know if a speaker is blown on a multimeter?
Attach the multimeter to each terminal of the speaker where the wires attach. If the multimeter reads 1.0 ohms, the speaker is working. If it displays a reading of infinite ohms, the speaker has been blown.
How much does a Recone cost?
Recone Price List. See below for packing and shipping instructions. and the cost is reasonable. Recones range in price from $40.00 – $125.00 plus shipping & handling.
How do you Recone a speaker?
Assemble the new speaker.
- Remove the masking tape from the air gap on the magnet’s voice coil.
- Set the new cone in the air gap.
- Remove the cone and apply adhesive.
- Carefully place the cone in the gap and apply a small amount of pressure.
- Insert shims into the air gap in the voice coil to center the speaker.
How do you test a speaker to see if it is good?
Speaker Testing Option 1: Connect a 9 Volt battery to the leads of the speaker, positive lead to positive battery end and negative lead to negative battery end. If a pulse is generated in the speaker then the speaker is still functioning properly. This same practice would apply to the tweeter speaker as well.
What is re-Coning a speaker?
Re-coning is the technique of removing all parts from the speaker frame and replacing with new parts. Most recone suppliers sell the kits in pieces which requires an expert to put together. We decided to offer user friendly drop in recone kits to the public. You can now save on speaker repairs by following simple instructions, provided by us,…
Should I Recone or replace my old speakers?
If a recone is done correctly, it is as good as new. For vintage or rare speakers, reconing is often the only option as the required speaker is no longer available for purchase or it is beyond a reasonable cost. If you opt to replace the speaker, here are a few things to know.
What is re-coning and how does it work?
Re-coning is the technique of removing all parts from the speaker frame and replacing with new parts. Most recone suppliers sell the kits in pieces which requires an expert to put together.
How do I center the cone on my speaker?
Carefully place the cone in the gap and apply a small amount of pressure. Insert shims into the air gap in the voice coil to center the speaker. Space each shim around the whole gap to assure consistency. This step is very important.
