Insteon Hub will automatically re-update its firmware at 2AM. You can manually update firmware from the Insteon app by tapping Update Hub from Edit House in Settings.
How do I access my Insteon Hub?
Identify Insteon Hub IP Address and Port
- Open an internet browser on the same network to which your Insteon Hub is connected and visit
- All Insteon Hubs on your network that have successfully connected to Insteon Servers within the past 24 hours will appear.
How do I add an Insteon switch to a hub?
Adding an Insteon Device with the Set Button
- Press and hold the set button on the back of Hub Pro until Hub Pro beeps.
- Press and hold the set button on your Insteon device until it double beeps or its LED begins blinking.
- Repeat the process in reverse, starting with the new Insteon device.
- Navigate to All Devices.
What hubs work with Insteon?
Insteon Hub works with almost the entire line of Insteon products.
| Motion Sensor Open/Close Sensor Hidden Door Sensor Leak Sensor | Wired Thermostat |
| IO Module | Ceiling Fan Controller Dimmer Micro Module On/Off Micro Module Open/Close Micro Module Dimmer DIN Rail On/Off DIN Rail Dimmer In-Line Module On/Off In-Line Module |
What happened to insteon cameras?
We have discontinued our line of cameras. For current Insteon camera owners, we recommend OWLR app.
How do I add a device to Insteon?
To do this, press and hold the set button on your new Insteon sensor until its LED begins blinking. Now tap Add a Device from the Configure your Home sheet. If more than four minutes elapses from the time you tap Add a Device and when you press your new Insteon device’s set button, you will have to restart the process.
Does Insteon work with Z Wave?
Insteon, by contrast, uses Statelink commands that are backward and forward-compatible. While you can use some Insteon devices for basic functionality without a hub, you’ll need a gateway for Z-Wave devices. Insteon Scenes kick in without any delay. There’s a slight but noticeable lag with Z-Wave.
Did insteon stop making cameras?
Insteon Camera Family We have discontinued our line of cameras. For current Insteon camera owners, we recommend OWLR app.
Does Insteon require a hub?
The Insteon hub is the king of all Insteon products keeping your devices connected, communicating with each other, and more control over your home automation products. Without the Insteon Hub, you can’t control them from your phone, or through your Alexa, Google Home, and other voice assistants.
What does the Insteon Hub do?
The Insteon Hub keeps track of every door, window, motion, water leak and smoke sensor in your home, giving you instant insight into the current state of your home: secure, insecure or anywhere in-between.
What can I do with my Insteon devices?
Take full advantage of your Insteon devices and create scenes that sculpt the light for your entire home. The Insteon Hub makes scene building fast and easy, giving you full control over your home’s lighting. With just a few taps, you can schedule your Insteon devices to turn on and off at sunrise, sunset or anytime during the day.
How do I download the Insteon lighting app?
To download the Insteon Lighting app, select your devices store below or scan the QR code with your devices’ camera. Our legacy app for homes that have a mix of Insteon lighting devices and older device types. With the Insteon Hub, remote control of your Insteon devices is truly remote.
Can I schedule my Insteon devices to turn on and off?
With just a few taps, you can schedule your Insteon devices to turn on and off at sunrise, sunset or anytime during the day. It’s never been easier to adjust the temperature of your home; whether you’re in bed or heading home from work, dial in the perfect temperature no matter where you are.
