The battery is fully charged when the light turns off. For your own safety, this charger has an automatic cut off function when all batteries are completely charged.

How do I use my Panasonic BQ cc55?

How to Use

  1. Step1. Place batteries in the slots according to the polarity position (+/-) indicated on each slot.
  2. Step2. Each battery is individually charged.
  3. Step3. Plug the charger into a standard 100-240V AC outlet.
  4. Step4. Check the LED light on the unit.
  5. Step5. Something wrong with the LED light?
  6. Step6.
  7. Step7.

How do you break in a NiMH battery?

When I start off with new cells, I first discharge them. Then I try to charge them as close to 0.5C as I can get. I then let them trickle charge for 24 hours. After this initial break in, I do 4-5 cycles and figure they are ready to go.

Can you leave rechargeable batteries on the charger unplugged?

Don’t Leave Battery on Charger: Unless your tool instructions specifically say to store the battery on the charger, be sure to remove it after charging is complete. Overcharging can damage a battery and shorten its life, and not all chargers shut off automatically.

How do you use a charger?

The service plate, or charger, is laid down at the beginning of the meal and typically stays for some or all of the courses before the main entree. Once the entree is served, the charger is taken off the table and replaced with the main dining plate. Dessert should never be served on a charger.

Can you charge Panasonic batteries with Energizer charger?

No, Panasonic BQ-CC16 nor BQ-CC55 chargers are NOT forgiving, actually they charge only Sanyo/Panasonic eneloops and refuse to charge older accus (Energizer, etc.).

Should I cycle my NiMH battery?

Please note that for new NiMH batteries, it is often necessary to cycle them at least three to five times or more before they reach peak performance and capacity. The first several times that you use your NiMH batteries you may find that they run down (discharge) quickly during use.

What is battery break?

What is the Break In Period? For sealed batteries, the initial break in period is about 15-20 discharges and recharges. During this time, you might notice that your battery has less range than what was advertised or promised. This is completely normal.