With the router powered on (ACT LED blinking), press the Factory Reset button with a pin, hold a few seconds until the ACT LED starts blinking rapidly, then release the button. After that, the router will restart with the default configuration.
How do I reset my DrayTek router password?
To change the router’s admin password, the process is similar for most models. Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change.
How do I reset my DrayTek vigor 130?
To reset the DrayTek Vigor130 to its default settings, you have to do the following steps:
- Switch on router.
- For at least 10 seconds, press the Factory Reset button.
- Device is automatically restarted.
- Default settings have been restored.
How do I access my draytek router settings?
How to login my Vigor Router
- Connect a computer to one of the router’s LAN ports by an Ethernet cable.
- Make sure the network interface is using an IP in the 192.168.
- Open a browser on the computer.
- After logging in, you will access the management page of the router.
What is the default password for draytek router?
Logging onto a Draytek router The IP address for the Draytek routers available from Gradwell is 192.168. 1.1 (as below). You will then be directed to the web interface for the device and you will need to log in. The default Username for the device is ‘admin’ and the default password will be the same (see below).
How do I access my DrayTek router settings?
How do I log into DrayTek vigor 130?
The DrayTek Vigor 130 modem has a web interface available on (username of “admin” and password of “admin” by default).
