Press the * (STATUS) button or arm/disarm the system to silence the beeps. They will resume after four hours unless the problem has been corrected.

How do I reset my GE Concord alarm?

How to Reset a GE Home Alarm System

  1. Press the “1” or “Disarm” button on the alarm control panel.
  2. Enter your access code using the numeric keys or the keys on the side of the control panel.
  3. Wait a moment. The alarm will be reset once your code is accepted.

How do I reset my Concord 4?

Hit the “B” key until you get to MASTER CODE, press “#” and it should show itself. If you want to clear memory and reset everything, hit 8+installer code +00 to get into SYSTEM PROGRAMMING. Hit the “B” key 3 times and you’ll be at CLEAR MEMORY.

How do I bypass Concord zone?

  1. Close all doors and windows.
  2. Arm your system in STAY or AWAY mode.
  3. Press # + CODE.
  4. The keypad will display “BYPASS SENSOR _ _”, enter the sensor you wish to bypass.
  5. The keypad will display “BYPASSED ZONE _ _” or “SENSOR _ _ BYPASSED”.

How do I change partitions on Concord 4?

To jump partitions:

  1. From any hardwired touchpad, press. Touchpads display, “ENTER PARTITION” or “ENTER CMD.”
  2. Press. if you want to change to Partition 1 or. The touchpad sounds one short beep if the jump was successful.
  3. Proceed to arm, disarm, or program as needed. The partition assignment reverts back if no.

How do I turn on the chime on my GE alarm?

Chime Mode When activated, two beeps will sound at the keypad whenever a door or window is opened. To enable or disable the Chime feature, Press 7 + 1 – chime turns on/off.

What features does the Concord 4 alarm system have?

The Concord 4 alarm system features an LCD keypad that spells out your security system status in an easy-to-understand manner.

What is a Concord 4 panel?

Made by General Electric Products / GE Interlogix, the Concord 4 is a hybrid panel, meaning it can use both hardwire contacts and wireless sensors. This capability allows it to “cover all of the bases,” regardless of the type of home it will be installed in.

How do I check the status of my Concord 4 security system?

The Concord 4 alarm system features an LCD keypad that spells out your security system status in an easy-to-understand manner. Security system trouble messages usually announce themselves through your keypad beeping. This is your first “warning” to check on the status and address any potential issues.

Can the Concord 4 be configured as a hardwired security system?

The Concord alarm can also be configured as a hardwired security system, eliminating the additional costs and battery changes of wireless transmitters. Really though, one of the best ways to let the Concord 4 shine is by using a combination of both its hardwired and wireless capabilities.