The following are the most relevant EQ effects for podcasters:

  1. Add warmth to a voice: If the voice sounds thin or weak.
  2. Remove boominess or small room resonance: Useful if the speaker recorded in a large room or an overly small room, like a closet.
  3. Improve vocal clarity: If the voice sounds muddled, try this range.

Which equalizer setting is best for voice?

Best EQ Settings for Vocals

  • Roll off the low-end starting around 90 Hz.
  • Reduce the mud around 250 Hz.
  • Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  • Add a presence boost around 5 kHz.
  • Boost the core around 1 kHz to 2 kHz.
  • Reduce sibilance around 5 kHz to 8 kHz.

How do I make my voice sound better when recording a podcast?

To make your voice sound better while podcasting, I’ll cover a few basic requirements. Purchase a great mic, compress your audio, treat your room, and use software to further enhance the listening experience. You might even consider utilizing a vocal coach—they’re surprisingly effective at helping train your voice.

How do I make my podcast sound professional?

  1. Find a quiet room with plenty of space around you for recording.
  2. Experiment with indirect microphone placement.
  3. Be conservative with your input levels.
  4. Record a high-resolution audio file.
  5. Work from an outline, and take time to get a great delivery.
  6. Record remote guests and co-hosts separately, if possible.

How do you EQ a podcast?

How to EQ a podcast. Use a High Pass Filter to Cut Everything Below 80Hz. … Cut 100-300 Hz to Add Clarity. … Cut 300-400 Hz if the Voice Sounds ‘Muddy’ … A Wide Boost Between 2-6 kHz Can Improve Clarity. … Cut Around 3-5 kHz if the Voice Sounds too Sibilant. EQ and your podcast is perhaps the most important audio enhancement you can make.

Can You EQ these sounds out with an equalizer?

You can EQ these sounds out with an equalizer, but the problem with that is you’re reducing these problematic frequencies for the whole take. Your better move is to use a de-esser, which is a compressor sidechained to an equalizer. It will only reduce the frequencies when they get too loud.

How to EQ vocals for better sound quality?

When you EQ other instruments in the mix, this is a good candidate to slightly cut out of other instruments like rhythm guitar or keyboard / synthesizer. It will make more room for the vocals and keep them intelligible. Starting Settings: Start at 5 kHz.

How do I change the frequency of my podcast audio?

In ReaEQ, you can move the Frequency slider left and right, manually enter a numeric value in the box, or click and drag the red circle to the preferred frequency. If you feel any voices in your podcast sound thin or lack clarity, then you can make small adjustments in the low-mid frequencies (between 100-400 Hz) that can add in warmth or clarity.