Connecting to a Seagate Consumer NAS

  1. Press the Windows key ( ) + E.
  2. File Explorer opens click on Network.
  3. Once the network page loads click on your Seagate Consumer NAS.
  4. Right Click on the share you would like to access and choose Map Network Drive.
  5. A new window will open.
  6. Sign in with your username and password.

How do I access my Seagate network drive?

Seagate Media app–Available for Android and iOS mobile devices….To access your Personal Cloud using your favorite web browser.

  1. Open a web browser and go to personalcloud.seagate.com.
  2. Sign in with your email address and password.
  3. Your NAS OS devices are listed. Click on the Personal Cloud you would like to access.

Can’t connect Seagate external hard drive?

Basic hardware troubleshooting steps:

  1. Try connecting the drive to a different port on the computer.
  2. If possible, try using a different cable.
  3. Try using the drive on a different computer.
  4. Verify the drive light is on.
  5. Try a different power outlet.

How do I reset my Seagate NAS?

Reset using the button

  1. Power down the Seagate Central by unplugging it from power.
  2. Wait approximately 15 seconds.
  3. Power up the Seagate Central again.
  4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes.
  5. Wait until the light becomes solidly illuminated.

How do I connect my Seagate hard drive to my PC?

Simply plug in the power, plug in the USB cable, and the drive should appear in (My) Computer/This PC and Windows Explorer/File Explorer. For Mac, you will need to reformat the drive prior to using it because it will be read-only on a Mac, which means you will be unable to copy or move data to the drive.

How do I reset my Seagate Wireless Plus?

Locate the reset button on the back of the unit next to the label. Insert a paperclip or other pointed object into the reset button and hold it in for 10 seconds, then release. This will reset the drive back to its original network settings.

How do I find my Seagate NAS IP address?

Locate the Physical Address column. Look for a Physical Address starting with 00-10-75. Once you find it follow it to the left and make note of the IP address associated with it. This is the IP address of your Seagate Consumer NAS.

Why is my Seagate Drive not showing up in Disk Utility?

1 If Seagate drive is not showing on desktop, check Disk Utility: open Finder > Applications > Utilities > Disk Utility. 2 If Seagate disk is not detected in Disk Utility, see the System Information/System Profiler section. 3 On macOS 10.13 or higher, click “View” in the upper left and select “Show All Devices”.

Why is my Seagate central not showing up on my router?

Wait until the Seagate Central has a solid green light on top, then check your router’s administrator page again to see if the Seagate Central is seen in there. If the drive is now seen in the router, but is not seen by the computer still, move on to step 3.

Is Seagate NAS compatible with Mac and Windows?

Purchased a Seagate Central 4TB NAS in November 2014; specs showed compatibility with Mac and Windows. After setup, I immediately noticed excruciatingly slow file transfer speeds with my 2008 MacBook Pro. Thinking the age of my Mac could be the reason, I bought a mid 2014 MacBook Pro; the problem continued.

How do I Find my Seagate central NAS folders?

-At Windows Feature, ensure SMB Direct, SMB 1.0/CIFS File Sharing Support are checked. -Use the Seagate Discovery Tool to locate your Seagate Central NAS. You should be able to see your folders! Hope it works for you 🙂 Hey, thanks for that!