Connect the Sky to the dvd player (deactivate the scart control on the settings) then dvd player to dvd. That way the tv should switch to scart for the dvd and over to the HDMI input when you switch the Sky box on.
How do I hook up my blu-ray player to my TV and cable box?
How can I connect with TV and Blu-ray player using HDMI cable?
- Connect one end of the HDMI video and audio cable to the HDMI OUT on your blu-ray Player.
- Connect the other end of the HDMI video and audio cable to the HDMI IN on the TV as Illustrated below.
How do I connect my DVD recorder to my set-top box?
fly lead from the wall to the back of your set-top box or digital TV recorder. TV recorder into your VCR or DVDR using an RCA cable. The yellow plug goes to the yellow input socket, the red plug to the red input socket and the white plug to the white input socket.
How do I connect my DVD player to my DISH satellite receiver?
Connect the coaxial cable from the output on the back of your Dish Network receiver to the “Antenna In” connector on the back of your DVD player. Connect the DVD “Out” connector to the input on your television using a separate coaxial cable.
How do I connect my DVD player to my Sony cable box and TV?
Attach your cable to your DVD player. Plug the HDMI or s-video cable into the appropriately labeled port on the back of the DVD player. If you’re using an s-video cable, you’ll also need to plug the red and white RCA cables into the red and white ports on the back of the DVD player.
How do you hook up a DVD player to yellow red and white TV?
If you are using the composite cable, plug the other end of the cord into the terminals on the DVD player marked Line Out. Be sure to insert the plugs into the terminals with corresponding colors. The red and white plugs are for sound, the yellow is for video.
How do I record from sky box to DVD?
On Sky+HD:
- Press tv guide on your Sky remote, select Planner and then highlight the recording you’d like to copy.
- Press left or right and you’ll see the green copy icon at the bottom of the screen.
- Press green to mark it for Copy.
- Press select to confirm your copy selections.
- Press record on your DVD / HDD recorder.
How do I connect Sky TV to a DVD player?
Then you need a HDMI DVD player, and a HDMI switch box, connect DVD and Sky to switch box inputs, and lead from TV to the output, job done. Alternatively, get a home cinema system, with HDMI inputs and outputs, and pass Sky through this. I used a Panasonic recorder last year that had pass through via its HDMI output of the scart connected devices.
How do I connect my DVD player to my TV?
If you have a standard Sky/Sky+ box simply connect a scart lead from your DVD player to the Sky box “VCR Scart” socket. The Sky box “TV Scart” should be connected to your Tv. With the Sky box on standby you should be able to see the DVD player’s output on the Tv. EDIT.
Why can’t I connect my TV to my Sky Box via HDMI?
As they are using Sky through HDMI, they will have no choice but to connect a SCART cable up between the DVD and the TV (or DVD > Sky > TV if they wish to use the SCART on the Sky box). Because the Sky box will not convert an analogue input (scart) to a digital output (HDMI).
How do I connect my TV to my cable box?
Plug the other end of the HDMI cable into your TV. If you only have one HDMI port on the back or side of your TV, make sure that you’re using it for your cable box. If you use a receiver for your TV, you may be able to use your receiver’s HDMI input instead of your TV’s.
