Cancelling a Print Job

  1. Press the (STATUS) button on the operator panel.
  2. Press the [Device Information] tab.
  3. Press [Job Lists].
  4. Select the job you want to delete, and press [Delete].
  5. Press [Yes] on the confirmation screen.

How do I reset my Okidata 320 Turbo?

Okidata Microline Reset Factory Settings

  1. Turn The Printer Off, Then.
  2. Hold Down The SEL and SHIFT buttons while you turn the printer on.
  3. All Settings Will Now Be Reset To The Original Factory Settings Including TOF Alignment. Home. Printer Menus.

How do I change the ribbon on an OKI printer?

Make sure the printer is turned OFF!

  1. Open the access cover and center the printhead.
  2. Remove the old ribbon cartridge.
  3. Unpack the new ribbon cartridge and install it on the printhead.
  4. Press gently on the ribbon cartridge until you feel it click into place.

Can you replace the ribbon on a printer?

Use a pointed object, such as a ball point pen, to guide the ribbon between the print head and ribbon guide. Turn the ribbon-tightening knob in the direction of the arrow to help feed the ribbon into place; it should not be twisted or creased. Reinstall the paper tension unit. Reinstall and close the printer cover.

How do I stop Oki from printing?

To cancel printing an ongoing job, press (STOP) on the operator panel. You can cancel a print job by deleting the job in the job list displayed on the operator panel.

What is character pitch on Oki printer?

Character pitch determines how many characters will print on each line. You can choose a specific fixed width for each character in characters per inch (CPI), or Proportional. The higher cpi settings are often used for spreadsheets.

What is the part number for the Microline 320/321 Turbo?

Document Title and Part Number Microline 320/321 Turbo User’s Guide P/N 59270107 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control.

Where does the first line print on a 320 Microline?

10|Microline 320/321 Turbo The first line prints at the red line of the plastic paper shield (1) on the printhead. The Top of Form and Forms Tear-Off settings of your printer interact. How you set the Top of Form depends on the status of the Forms Tear-Off menu setting.

How do I get support from Oki Data?

Oki Data provides support via the Internet. Oki Data’s main web site, is the gateway to Oki Data’s products and services. my.okidata.com is a powerful area of Oki Data’s web site designed to help you personalize the information and service you get from Oki Data. You can find information at your convenience, at any time.