Use PVC pipe for an easy-to-build, storable and easy watering homemade recycled tomato cage that will last season after season. Effective, inexpensive, and easy-to-make and store, tomato cages don’t get better than this. Hold the three lengths of PVC together and mark the ends, as shown.
What is a tomato trellis?
A tomato trellis is a freestanding structure usually made from wood or metal that is used to support the sprawling vines and heavy fruit of the tomato plant. Providing support for your tomato plants helps keep the plants healthy, so they can produce maximum yields.
What is the best way to hold up tomato plants?
5 Ways of Supporting Your Tomato Plants
- Stake them. Use whatever stakes you have on hand – wooden stakes, bamboo, metal – just be sure that they’re at least 4 feet high.
- Fence them.
- Cage them.
- Cage them – maximum security edition!
- Trellis them.
How do you make tomato cages out of PVC pipe?
Cut a 1-inch diameter PVC pipe into 10-inch sections using a hacksaw or PVC pipe cutter tool. You need 12 of these 10-inch sections to make one tomato cage. Attach four sections together using three 4-way, 30-degree angle PVC connectors to create a tomato cage leg.
What is the best support for tomato plants?
Tomato cages provide support for tomato branches and fruit so the plant stems don’t bend or break beneath their summer abundance. Although wire cages are readily available, these are often too short or too flimsy to provide enough support. PVC pipes are inexpensive and sturdy, which makes them an excellent choice for supporting heavy plants.
How do you attach PVC pipe to PVC pipe?
Stick the 48″ pieces of 1/2″ PVC into the 12″ anchoring pipes. Push them in as far as possible to ensure the structure will be stable. At the top of each corner PVC pipe, secure a T connector. Add a joint connector piece, then add another T connector on top.
How do you connect PVC pipes to a raised bed?
Have the open joints face opposite corners. On the middle anchor PVC pipes, add a cross connector. Add a joint connector piece, then add a T connector on top of the cross connector, with the open joint facing into the raised bed. Using the 43″ pieces of PVC, connect the support pipes along the narrow ends.
