The e2 Weight Distribution Hitch, # FA94-00-1000, is a sturdy system that has 2-Point Sway Control and comes with a 10-year warranty. The unique design of this system does allow you to back up without having to disconnect the sway bars.
What is weight distribution capacity?
A weight distribution system helps to ensure a smooth, level ride and allows you to tow to the maximum capacity allowed by your hitch. A weight distribution system is recommended if your trailer weight is more than 50 percent of your vehicle’s weight.
What is the difference between e2 and e4 hitch?
The original 4 point hitch has 4 friction points to reduce sway, 2 points at the trailer brackets and 2 points at the hitch head. The e2 only has 2 points of friction at the trailer brackets. The 4 point hitch will reduce sway better than the 2 point. Both will distribute the weight the same.
How do I balance my caravan weight?
For balance, it is best to make the caravan heavier near the nose than the back. This doesn’t mean loading everything into the nose to weigh it down completely, just packing so it is slightly heavier than the rear to avoid tipping. Don’t pack anything you don’t really need to bring.
Does a 1 ton truck need a weight distribution hitch?
Every truck manufacturer, whether it is for a midsize, 1/2-ton, or heavy-duty, requires a weight-distributing hitch when using a bumper trailer hitch ball. For example, hooking up a double-axle trailer (2,200 pounds) and loading a car (4,000 pounds) would require you to use the hitch.
Is equalizer and fastway the same?
Equalizer is a very well-known brand of weight distribution system that people are so familiar with that some just refer to all weight distribution systems as equalizer hitches. Fastway weight distribution systems are made by the same company as Equal-i-Zer systems so they are almost an Equal-I-Zer in brand as well.
Can a weight distribution hitch be too big?
It is important to know that while a weight distribution hitch redistributes weight and balances your load, it does NOT increase the total amount of weight that your truck and trailer can handle. You should never exceed the capacity of your lowest-rated towing component.
What are the specs of a 2E engine?
The 2E engine features a cast-iron block and aluminum cylinder head with the single overhead camshaft (SOHC) and three valves per cylinder (12 in total). Compression ratio rating is 9.5:1. It has a 73.0 mm (2.87 in) cylinder bore and 77.4 mm (3.05 in) piston stroke. 2E or 2E-L, 2E-LU It is a carburetored version of this engine.
What is the purpose of the wheel weight distribution?
Weight distribution on the front and rear wheels is well bal- anced, particularly the large weight on the front reduces side slipping and keeps stability while carrying materials.
Why do I need the E2™ hitch?
For the best and safest towing experience, you need the e2™ hitch, providing you with faster and easier weight distribution and sway control. The e2™ hitch gives you faster and easier sway control and weight distribution without the hassle of chains or add-on sway bars.
How many valves does a 2E engine have?
The engine has single overhead camshaft, that is driven by a timing belt and three valves per cylinder (12 valves in total). The 2E engine used special valve shims to adjust the valve clearance. ATTENTION!
