Oxy Propane/Propylene Torch Whilst a standard Oxy Acetylene Torch can be used for Oxy Propane/Propylene, it’s far from ideal. Propane & Propylene are slower burning gases. Propane & Propylene also travel through the system as a vapour, not a gas, not actually turning into a gas until they meet air.
Are acetylene and propane regulators the same?
If your working pressure is less than 15PSI you can still use the acetylene regulator because it is designed to be used under the same cylinder pressure as propane and propylene and provides maximum outlet pressure of 15PSI. The same nozzle can be used for both propane and propylene.
Can you use propane with acetylene regulator?
There has been a buzz about the shortage of acetylene. Gas companies have been encouraging people to use alternative fuel gases, such as propane and propylene. To use your current acetylene kit with propane or propylene, you do not need to replace the oxygen regulator, torch handle or cutting attachment.
Which is safer propane or acetylene?
The flammability limit of acetylene in the air is 2.5% to 82%, whereas that of propane is 2.1% to 9.5%. This may lead to a conclusion that acetylene is more dangerous than propane; however, the same is not true. Acetylene’s specific gravity 0.9 so it is lighter than air. If gas leaks out it will rise.
Is oxy propane hotter than oxy acetylene?
The simple answer to this question is yes. The maximum neutral flame for acetylene in oxygen is about 5720 F, while the temperature for propane is 5112. This does not, however, mean that propane gives off less heat. Acetylene may burn hotter and can even pre-heat metal faster.
Why is an acetylene torch hotter than a propane torch?
Acetylene releases almost 40% of its heat in the inner flame cone. Therefore, acetylene is better for cutting than propane. While temperature wise acetylene is hotter than propane the fact is that people are using propane for cutting incorrectly.
Who invented oxy-acetylene gas cutting torch?
Beginning in 1899, John Harris discovered the oxy-acetylene method of cutting while conducting research on the manufacture of synthetic rubies. While working on the materials, he accidentally cut the metal plate beneath the synthetic ruby, discovering the world’s first flame-cutting torch.
How hot does a propane torch burn at?
While propane-oxygen combinations can reach a maximum temperature of 3,623 degrees F, or 1,995 degrees C, a propane-butane torch only goes up to 2237 degrees F, 1225 degrees C. A torch flame consists of two cones, an outer light blue flame and an inner dark blue flame.
Can you use acetylene regulator for propane?
If your working pressure is less than 15PSI you can still use the acetylene regulator because it is designed to be used under the same cylinder pressure as propane and propylene and provides maximum outlet pressure of 15PSI.
