More often than not, a spool will cost less than a full sized in-ground pool and more than a conventional spa. The price to install will also be much less than if you installed a pool/spa combination. When considering the costs of a spool, you’ll also want to factor in how you plan to use it.
What size is a spool pool?
Spools, on average, measure around 10 to 15 feet long by six to eight feet wide. If you entertain a lot (spools are sometimes referred to as “cocktail pools”), a larger spool pool will give your guests plenty of room to splash around.
Can you swim in a spool?
If you want to get the most distance in, you can set your spool to enable you to literally swim against the current; essentially swimming in place as you stroke and kick against the jets.
What is the difference between a cocktail pool and a spool?
The shorter answer is: it’s really just a small pool. “Spool” is a newer term used for cocktail pools with more traditional spa features, but in many cases, the two terms are essentially interchangeable. Cocktail pools can have heated jets (making them more like spas or hot tubs). They can have bench seating.
How deep is a spool pool?
These spools have two sections: an isolated sitting section for spa relaxation and a larger swim chamber that is 50 inches deep. Overall sizes range from about 8 by 18 feet to 8 to 20 feet.
How much does it cost to put a spool in?
Spool Costs. The average cost to install an in-ground spool is $22,650 including labor, but this can vary depending on the type you choose.
How many gallons is a spool?
The small size of a typical spool — 5,000 to 10,000 gallons — with sides that might range from 10 to 15 feet, means clients can often afford to upgrade to more expensive materials compared to larger pools.
What does a spool cost?
The average cost to install an in-ground spool is $22,650 including labor, but this can vary depending on the type you choose….Spool Costs.
| Spool Building Factor | Avg. Cost |
|---|---|
| Materials | $20,000 |
| Labor | $1,650 |
| Permits | $1,000 |
| Total | $22,650 |
What does a spool pool cost?
A spool pool costs $22,650 on average but prices can range from $5,500 to $50,000. What do you get when you cross the refreshment of a pool with the luxury of a spa? A spool.
Whats the average cost of a spool?
$22,650
The average cost to install an in-ground spool is $22,650 including labor, but this can vary depending on the type you choose….Spool Pool Prices.
| Material | Cost |
|---|---|
| Concrete (Gunite) | $23,000 |
| Fiberglass | $15,000 |
| Vinyl | $10,000 |
| Steel | $25,000 |
How long does it take to heat a spool?
Like standard pools, the cost to maintain and service your pool is a factor. However, the benefit of a spool is that it can warm up in as little as 15 minutes, while it may take several hours to heat a standard pool.
How much does a spool pool cost?
On a spool budget of $20,000 you can get an average-sized spool with more features like heaters, water jets, decorative lighting, or in-spool seating. The option to have an in-ground spool is also within this range. A spool pool costs $22,650 on average nationally.
What type of pool is a spool?
A spool or “spa/small pool” (also called a cocktail, plunge, or splash pool) is a miniature pool, usually around 300 square feet. The biggest difference between this and a spa is the depth. While they both are small and have similar features, spools are deeper, allowing you to submerge fully while standing.
What is a spa pool spool?
A spool pool, however, is the perfect combination on a pool and a spa. It’s also known as a spool spa and a swim spa. Measuring 10 to 16 feet long and 6 to 8 feet wide a backyard spool pool is a prodigious size for mixing relaxation and swimming activities.
